Warning: mkdir(): Permission denied in /home/virtual/lib/view_data.php on line 86 Warning: fopen(/home/virtual/ejpbl/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: No such file or directory in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Analysis on Factors for Prior Evaluation of PBL Class Using IPMA

Analysis on Factors for Prior Evaluation of PBL Class Using IPMA

Article information

J Probl Based Learn. 2022;9(2):70-76
Publication date (electronic) : 2022 October 31
doi : https://doi.org/10.24313/jpbl.2022.00185
Department of Management Information Systems, Jeju National University, Jeju, Korea
Corresponding author: Mincheol Kim, Department of Management Information Systems, Jeju National University, 102 Jejudaehak-ro, Jeju-si, Jeju Special Self-Governing Province 63243, Korea Tel: 82-64-754-3182 Fax: 82-64-724-3138 Email: mck1292@jejunu.ac.kr
Received 2022 April 17; Revised 2022 September 28; Accepted 2022 October 31.

Abstract

Purpose

This study examines how students value each of the factors represented in a matrix reflecting the following importance-performance matrix analysis (IPMA). This IPMA was used as the primary survey (Kim, 2019), and each evaluation factor, the average value of the latent variable, and the estimated path coefficient were used

Methods

SmartPLS 3.0 was used for the numerical calculations and SPSS 19.0 was used to create the graph. Analysis occurs prior to student participation in the class to form a consensus among students at the beginning of the semester.

Results

Attempts are made to derive the analysis results and apply them to actual problem-based learning classes to improve class evaluation through feedback. The results show that prioritizing the evaluation factors such as learning outcomes and self-directed learning is meaningful in terms of lecture efficiency.

Conclusion

This approach is particularly meaningful, as it attempts an integrated model (importance-performance matrix-analytical hierarchy process) and is a continuation of a previous study (Kim, 2019)

INTRODUCTION

Interest in educational methods has increased recently, due to an emphasis on the learning process, and in the era of the Fourth Industrial Revolution, it is socially necessary to foster creative talents based on an information- and knowledge-based society. Problem-based learning (PBL) education is recognized as a method that is applicable to this situation (Hasegawa, 2019; Minamide & Takemata, 2019;Peramunugamage et al., 2019). The aim of the PBL method is to deal with practical problems using a learner-centered approach, in which students form a team and solve problems together (Barrows, 1985). This enables more immersive learning by finding realistic solutions to problems. Furthermore, because it includes team or group activities, various elements such as communication, teamwork, leadership) can be improved in the process of problem solving (Woods, 1996).

Therefore, educational methods, such as PBL, are realistic alternatives that allow students to experience the creative process through voluntary learning activities, actively solve existing problems, and gain new knowledge, before evaluating the PBL team performance using various methods, such as detailed evaluation, report evaluation, team portfolio evaluation, exhibition evaluation, team peer evaluation, and attendance. However, some cases involve more subjective judgment than the test evaluation conducted in general lectures. This highlights the need for students to create their own evaluation ratio, while explaining a clear evaluation method at the beginning of the class. Based on this need, in this study, the relative positions between PBL evaluation factors at the beginning of the class were calculated and evaluated directly by the students participating in the class using the matrix method. In other words, by applying the method of importance-performance matrix analysis (IPMA), an extension of importance-performance analysis, a method mainly used in business administration is achieved. Specifically, IPMA is a valid methodology for prioritizing evaluation factors in two dimensions (ie importance and performance). In other words, in the description of specific evaluation factors, the focus is mainly on the potential of factors of high importance but at the same time of relatively low performance (Fornell, et al., 1996; Gronholdt et al., 2000; Hock et al., 2010; Schloderer & Ringle, 2014). The ultimate purpose of this study was to examine how the evaluation factors of the class were recognized in each matrix by the students prior to participating in the class.

1. Background

In our prior experience, an instructor usually performed evaluation after the completion of PBL class. A complementary alternative to this general evaluation, a method in which students directly participate in class evaluation, such as the study by Kim (2019), could be considered. However, to apply this evaluation method more logically, it is necessary for each student to understand the shared perception of the evaluation factors of the class before proceeding with the class.

Therefore, in this study, as shown in the following figure, along with the evaluation method of Kim’s (2019) study, a procedure for determining the relative positions of relevant evaluation factors before the class was proposed. This approach intended to build an integrated model (importance-performance matrix-analytical hierarchy process; IPM-AHP) as an attempt to build on Kim’s (2019) study.

METHODS

At the beginning of the semester (at the beginning of the class), IPMA was used as the primary survey (Kim, 2019), and each evaluation factor, the average value of the latent variable, and the estimated path coefficient were used; therefore, the partial least squares-structural equation modeling (PLS-SEM) analysis method could be expanded. Specifically, PLS-SEM analysis provides information on the relative importance of each factor in explaining the cause and effect between each factor within the proposed model. In other words, it was possible to grasp the direction of the PBL class by analyzing the effectiveness of the evaluation items by using a simple questionnaire for students at the beginning of the class. In this regard, it was possible to apply not only PBL, but also highlight learning methods that included flipped learning and action learning. Specifically, in the first week of each semester, students were given a questionnaire (Appendix) and an explanation of how to evaluate the class, and after the questionnaires were completed, the analysis results were introduced in the following week. Students were able to recognize the evaluation direction of the final evaluation factors in the future while checking the relative positions between self-evaluation, peer evaluation within team members, and evaluation of other teams. IPMA used the average value of the latent variable values and the estimate of the path coefficient in a general PLS-SEM to extend the analysis method. More precisely, the IPMA process compared the total effect of the structural model on the final dependent factor (endogenous variable) with the mean value of the total latent variable of the antecedent independent factors (Fornell et al. 1996;Gronhold et al., 2000;Hock et al., 2010; Schloderer & Ringle, 2014), where the total effect showed the degree of influence on the final dependent factor (variable), indicating the level of importance or importance. The average value of the antecedent factors (independent variables) was expressed as a performance level or performance. The goal of this analysis was not only to recognize the antecedent independent variable with relatively high importance for the final dependent factor, but also to recognize the relatively low level of performance. In the end, among the factors evaluated, one can show potential areas of improvement that may receive more attention in the future.

This analysis focused on the results of the existing student satisfaction (performance) questionnaire and utilized information on the relative importance of the final dependent variable, the total effect, on the overall expectation of the class (Hair et al., 2016). In this study, SmartPLS 3.0 was used to calculate numerical values and the graph was created using SPSS 19.0.

1. Research Model

Using the IPMA method, this study analyzed the evaluation factors through the students' survey opinions at the beginning of the class, as shown in Figure 1 (research model): PLS-SEM based on IPMA. Various studies employing the IPMA method have used many measures other than performance for one axis of the matrix (Su & Cheng, 2019). The IPMA method is a technique for obtaining the average value, placing importance and performance on the Y-axis and X-axis, respectively, and for drawing a scatterplot across the four quadrants, that is, a two-by-two matrix (Figure 2). As it is a method for substituting and analyzing measurement values based on importance, performance, or other factors, it is a useful method for checking which areas or fields are lacking and which are not sufficient or overflowing.

Figure 1.

Research model using SmartPLS 3.0.

Figure 2.

IPMA analysis diagram.

This study utilized SmartPLS 3.0 software to conduct IPMA.

In previous studies, analysis was mainly conducted on only one aspect (importance or performance). However, this study considers importance and performance at the same time and analyzes the results with a matrix to consider the priority of evaluation factors (Al-Emarn & Mezhuyev, 2019; Sohaib et al., 2019). In the above matrix, as in the case of Figure 3, the instructor can inform the participating students in advance that the self-evaluation factor is the most effective class management method. In other words, students can become familiar with a clear evaluation direction at the beginning of the class.

Figure 3.

Importance-performance matrix analysis evaluation result (Example).

RESULTS

1. Research Scope and Data Collection

The timeline of this study proceeded according to the research procedure, starting with the base year (2020), and the spatial scope of this study was for the PBL class conducted by this author. Analysis occurred prior to the class, to reach a consensus among students at the beginning of the semester. This study derived analysis results and applied them to actual PBL classes, so that they could be used to improve class evaluation through feedback on the next lecture. The data used in this study comprised involved feedback from a total of 30 persons, focusing on interested respondents in PBL-related classes, and the final data were analyzed. The questionnaire items presented in this study were extended and applied to Kim’s (2019) study based on the contents extracted from Kang’s (2003) study (Table 1). The first criteria presented in Figure 2 were classified into three categories: Self-evaluation, team member evaluation, and team evaluation. Four criteria were established as secondary criteria.

Questionnaire evaluation items

2. Empirical Results

It was possible to create an IPM using the previously calculated IPMA data analysis results. That is, the X-axis represents the total effect of each non-standardized independent variable on the final dependent variable as importance and the Y-axis represents the performance level, which is a numerical value obtained by recalculating the average value of each independent variable.

One can see by looking at the following IPM analysis (Figure 4), this study placed the importance and satisfaction of each variable on a two-dimensional line, where the Y-axis represents the level of satisfaction with export activation and the level of satisfaction increases as it goes to the right, and the X-axis shows the importance of export-activating factors. The average values of importance and achievement were calculated using the X-and Y-axes as the central axes.

Figure 4.

Importance-performance matrix analysis evaluation result on the variables in each factor.

Accordingly, the most meaningful result in the expressed IMPA is the interpretation of variables that are elevated in the fourth quadrant (located under the right foot). In other words, a high level of importance (influence) is shown for the final goal, the dependent variable (here, the expected satisfaction level for the total class), but a low level of performance (here, the satisfaction of each factor) is shown, so it is potentially much improved. It is interpreted as having high potential for improvement if a variable with a low level of importance compared to other variables in the IPM has a lower priority in terms of performance improvement. The results of this analysis show that it is meaningful, in terms of lecture efficiency, to prioritize the evaluation factors of S2, S4, T4, and T2. That is, it is a meaningful factor for students to prioritize the performance improvement of variables that are highly important for the final target variable (e.g., expectation) as a lecture evaluation factor.

CONCLUSION

In the case of student-led classes, such as PBL, the instructor often evaluates without an exam. In other words, it is necessary for students to self-assess each student's contribution to the group process, and to encourage them to establish aspects that are most relevant to self-directed assessments. Therefore, it is difficult to determine how to conduct final evaluation and grade. In this case, it is possible to supplement the weights between evaluation factors through a method in which students directly participate and decide (Kim, 2019). As an approach that complements this method, it can be a very useful for instructors to conduct PBL classes by figuring out the areas or factors that students see as relevant prior to the class. Hence, this study is meaningful in that it suggests the applicability of the methodology rather than focusing on the results of this study itself.

Specifically, contrary to the evaluation method of Kim’s (2019) study, which was an approach taken when all classes were completed, the method of this study was conducted at the beginning of the semester when classes started. Therefore, the instructor was able to increase immersion in the lecture by recognizing in advance which evaluation factors the students wanted to focus on. Ultimately, this study intends to apply the approach to try the integrated model (IPM-AHP) in the future, as this approach is a continuation of the previous research (Kim, 2019) proposed by the proponent.

Therefore, this study is regarded as an exploratory study, in that it is possible to grasp the evaluation direction in advance at the beginning of class by introducing the PBL education procedure and evaluation method. In the end, this approach can be used by the instructor to recognize the evaluation factors of class participants in advance and to seek a more objective evaluation method. It is hoped that such an exploratory study will eventually provide a way to increase students' immersion and satisfaction with the class.

Notes

Conflict of interest

The author declared no conflict of interest.

Acknowledgements

This paper was supported by funding (2020) from the Halla Newcastle PBL Education and Research Center. I sincerely appreciate anonymous reviewers for the guidance in preparing this paper for publication. I sincerely appreciate anonymous reviewers for the guidance in preparing this paper for publication.

References

1. Al-Emran, M., & Mezhuyev, V. (2019). Examining the effect of knowledge management factors on mobile learning adoption through the Use of importance-performance map analysis (IPMA). In International Conference on Advanced Intelligent Systems and Informatics (pp. 449-458). Springer, Cham.
2. Barrows, H. S. (1985). How to design a problem-based curriculum for the preclinical years (Vol. 8). Springer Pub Co.
3. Fornell C, Johnson M. D, Anderson E. W, Cha J, Bryant B. E. 1996;The American customer satisfaction index: nature, purpose, and findings. Journal of marketing 60(4):7–18.
4. Gronholdt L, Martensen A, Kristensen K. 2000;The relationship between customer satisfaction and loyalty: cross-industry differences. Total quality management 11(4-6):509–514.
5. Hair Jr, J. F., Hult, G. T. M., Ringle, C., & Sarstedt, M. (2016). A primer on partial least squares structural equation modeling (PLS-SEM). Sage publications.
6. Hasegawa, M. (2019). Analysis of student members’ attitudes on out-of-curriculum science communication activities and resultant educational effects. In international conference on interactive collaborative learning (pp. 50-59). Springer, Cham.
7. Hock C, Ringle C. M, Sarstedt M. 2010;Management of multi-purpose stadiums: Importance and performance measurement of service interfaces. Journal of Problem-Based Learning 14(2-3):188–207.
8. Kim M. 2019;On utilizing PLS-SEM based IPM method - Focused on export competitiveness factor. Journal of Digital Convergence 17(7):43–47.
9. Kim M. 2019;Priority Analysis of PBL Evaluation Score using AHP. Journal of Problem-Based Learning 6(2):54–58.
10. Minamide, A., & Takemata, K. (2019). Poster: Design of PBL Educational Program in Collaboration with Printing Company. In International Conference on Interactive Collaborative Learning (pp. 749-754). Springer, Cham.
11. Peramunugamage, A., Usoof, H. A., Dias, W. P. S., & Halwatura, R. U. (2019). Problem-Based Learning (PBL) in Engineering Education in Sri Lanka: A Moodle Based Approach. In International Conference on Interactive Collaborative Learning (pp. 770-780). Springer, Cham.
12. Schloderer M. P, Sarstedt M, Ringle C. M. 2014;The relevance of reputation in the nonprofit sector: The moderating effect of socio‐demographic characteristics. International Journal of Nonprofit and Voluntary Sector Marketing 19(2):110–126.
13. Sohaib O, Hussain W, Asif M, Ahmad M, Mazzara M. 2019;A PLS-SEM neural network approach for understanding cryptocurrency adoption. IEEE Access 8:13138–13150.
14. Su C. H, Cheng T. W. 2019;A sustainability innovation experiential learning model for virtual reality chemistry laboratory: an empirical study with PLS-SEM and IPMA. Sustainability 11(4):1027.
15. Woods D. R. 1996;Problem-based learning for large classes in chemical engineering. New Directions for Teaching and Learning 1996(68):91–99.

Appendix

Appendix. Questionnaire for class improvement

jpbl-2022-00185-app1.pdf

Article information Continued

Figure 1.

Research model using SmartPLS 3.0.

Figure 2.

IPMA analysis diagram.

Figure 3.

Importance-performance matrix analysis evaluation result (Example).

Figure 4.

Importance-performance matrix analysis evaluation result on the variables in each factor.

Table 1.

Questionnaire evaluation items

Primary criteria Secondary criteria
Self-evaluation S1. Actively participate in problem-solving activities.
S2. The learning outcomes will be presented faithfully.
S3. A variety of information will be collected and used.
S4. Self-directed learning will be carried out.
Team member evaluation T1. Team members will actively participate in problem-solving activities.
T2. Team members will faithfully present the learning outcomes.
T3. Team members will collect and utilize a variety of information.
T4. Team members will conduct self-directed learning.
Evaluating other team E1. The other team will provide a lot of information related to the problem..
E2. Other teams will collect and analyze various learning materials and present their opinions with reasonable grounds and reasons.
E3. Other teams will be interested and participate most actively in learning.
E4. Other teams will work hard to learn so as not to disturb others.